Section G. Maintenance Belarus– 510/512 Operating manual
89
Operation 16. Changing oil in engine
• Warm up the diesel engine to the
normal operating temperature (70°C
min.).
• Place the tractor on an even surface,
stop the engine and engage the park-
ing brake.
• Remove the cap (2) of the oil filler neck
and unscrew the drain plug (4).
ATTENTION!
Be careful to avoid con-
tact with hot oil.
Drain oil into a container for waste oil
storage.
• Place the drain plug (4) to place and fill
in fresh motor oil through the oil filler
neck (1) (M-8
Д
M, M-8
Г
2
, M-8
Г
2K
during
winter and M-10
Д
M, M-10
Г
2
, M-10
Г
2K
during summer to the upper mark of the
dipstick (3).
• Install the filler neck cap (2) to place.
• Start the engine and let it run for 1-2
minutes.
• After 10 minutes from the moment of
stopping the engine, check oil level
with the dipstick.
• If necessary, add oil.