Section G. Maintenance Belarus– 510/512 Operating manual
97
Operation 28. Flushing steering
booster drain filter
To flush the oil filter, proceed as follows:
a)
raise the facing;
b)
disconnect the oil ducts 7, 13 and
15, unscrew the bolts 5 fastening the
cover 6 to the housing, remove the cov-
er using two unmounting bolts.
c)
screw out the relief valve 11 and
remove the drain filter 9;
d)
flush the filter in detergent solu-
tion;
e)
tighten the nut 8 of the pivoting
shaft;
f)
install the filter and perform the
operations in the order reverse to disas-
sembling.
g)
at the same time, adjust end play
of the steering shaft, proceeding as fol-
lows:
loosen the locknut 1 and screw in the
adjustment bolt 2 up to stop against the
shaft end, then unscrew it by 1/8 to 1/10
turn and lock with the locknut 1.
Operation 29. Lubricating front axle
steering knuckles (Belarus 510)
With a gun, make 10 to 12 injections of
grease through pressure lubricators
(one lubricator per each knuckle). The
Litol-24 grease must be used.
