Baumer 11192208 Operating Manual Download Page 79

Page: 79 / 226

V2.6 | 8/30/2022 | 1120758

7.5 Category: ChunkDataControl

The chunk is a data packet that is generated by the camera and integrated into the pay-

load (every image), if chunk mode is activated. This data include different settings for the

respective image. This integrated data packet contains different image settings. Baumer

GAPI can read the Image Info Header (Chunk).

There are three Chunk modes:

Image Data

Only the image data is transferred, no Chunk data.

Chunk Data

Only the chunk is transferred, no image data.

Extented Chunk Data

Chunk data and image data is transferred. The Chunk Data are included in the last data

packet.

Summary of Contents for 11192208



































































































































































































































Search results

Summary of Contents for 11192208

Reviews:

Related manuals for 11192208

Brands by name

Popular brands

Baumer 11192208, Operating Manual

Search results

Summary of Contents for 11192208

Reviews:

Related manuals for 11192208

Brands by name

Popular brands