36
4.6 IP Protection classes
The devices continue working in an industrial environment to meet the requirements of
various protection classes.
IP40
with mounted lens and 10 GigE cable
IP67
with mounted tube and cable
Notice
Definition IP67
IP67 stands for dust tightness besides the protection against submersion into 1 meter
deep water for up to 30 minutes. The desired protection level is given as long as the
difference in temperature between camera and water is less than 5 K and the water has
a temperature of 15 °C (+ 59 °F) ... 35 °C (+ 95 °F).
Caution
IP
Protection
In order to achieve the mentioned IP protection level, please note the follow-
ing information:
▪ The tube needs to be screwed on gap-free as shown in the figure on the
next page.
▪
The M12 connectors need to be tightened with a torque value of 0.4 Nm.
For that Baumer suggests the use of a torque driver (such as Wiha
TorqueVario
®
-S ESD) in combination with a wrench for assembling
sensor/actuator cables with M12 connector (such as Phoenix Contact
SAC BIT M12-D15).
▪
Use a cable that also meets the required IP protection class.
VLXT.FO only
On the SFP+ socket, a Harting Adapter and a corresponding cable must be
used.
▪
Harting Adapter: PushPull SFP XS Receptable short, LC Dup (without
screws) (item no.: 09574110501200)
▪
Compatible cable: PP SSFP XS Assy, XSsh-LCdx 50/125 (item no.:
33262310200018)
The IP Protection class-
es was not evaluated by
UL.
Summary of Contents for 11192208
Page 225: ...225 V2 6 8 30 2022 1120758 ...
Page 226: ...www baumer com worldwide ...
