Baumer 11192208 Operating Manual Download Page 170

Page: 170 / 226

170

V2.6 | 8/30/2022 | 1120758

7.17.3 ApertureStatus (.EF only)

Reads the status of the Aperture feature.

Name

ApertureStatus

Category

OpticControl

Interface

IEnumeration

Access

Read only

Unit

Values

Busy

The aperture executes a feature access/command.

Error

The aperture encountered an error.

Not Connected

The aperture is physically not connected.

Not Initialized

The aperture is not initialized.

Not Supported

The aperture is physically connected but not support-

ed.

Ready

The aperture is ready to use.

7.17.4 ApertureStepper (.EF only)

ApertureStepper controls the stepper value of the Aperture. The minimum value is the

maximum aperture.

Name

ApertureStepper

Category

OpticControl

Interface

IInteger

Access

Read / Write

Unit

Values

e.g. 42 ... 85 (Increment: 1)

value range depending on lens

7.17.5 FocalLength

Focal length in millimeters.

Name

FocalLength

Category

OpticControl

Interface

IFloat

Access

Read only

Unit

Values

e.g. 0 ... 4,294,967,295,000000 (Increment:1.00)

value range depending on lens

Summary of Contents for 11192208



































































































































































































































Search results

Summary of Contents for 11192208

Reviews:

Related manuals for 11192208

Brands by name

Popular brands

Baumer 11192208, Operating Manual

Search results

Summary of Contents for 11192208

Reviews:

Related manuals for 11192208

Brands by name

Popular brands