Baumer 11192208 Operating Manual Download Page 64

Page: 64 / 226

V2.6 | 8/30/2022 | 1120758

7.1.23 TriggerSource

Specifies the internal signal or physical input Line to use as the trigger source. The se

lected trigger must have its

TriggerMode

set to On.

Name

TriggerSource

Category

AcqusitionControl

Interface

IEnumeration

Access

Read / Write

Unit

Values

Action1

Specifies which Action command to use as internal

source for the trigger.

All

All trigger sources are active.

Counter1End

(≥ Rel. 2 only)

Specifies which of the Counter signal to use as internal

source for the trigger.

Counter2End

(≥ Rel. 2 only)

Specifies which of the Counter signal to use as internal

source for the trigger.

Line0

Specifies which physical line (or pin) and associated I/O

control block to use as external source for the trigger

signal.

Line1

Specifies which physical line (or pin) and associated I/O

control block to use as external source for the trigger

signal.

Off

No trigger source is active.

Software

Specifies that the trigger source will be generated by

software using the TriggerSoftware command.

Summary of Contents for 11192208



































































































































































































































Search results

Summary of Contents for 11192208

Reviews:

Related manuals for 11192208

Brands by name

Popular brands

Baumer 11192208, Operating Manual

Search results

Summary of Contents for 11192208

Reviews:

Related manuals for 11192208

Brands by name

Popular brands