Service Manual
Green Bedding Separator eng_deu June 2012
Page 42 of 43
EC Declaration of Conformity
according to EC Directive 2006/42/EC
The manufacturer
FAN Separator Gesellschaft m.b.H.
Bernecker Straße 5, D-95509 Marktschorgast - Germany
phone: +49 9227 938-400; FAX: +49 9227 938-444
herewith confirms that the machine component mentioned below
Designation of machine
FAN Press Screw Separator
Machine type / basic units
PSS 3.2 – 520
PSS 3.2 – 780
PSS 3.2 – 1040
PSS 3.2 – 1300
corresponds analogously to the requirements of the Machinery Directive 2006/42/EC.
In case of a modification of the machine not accorded with FAN GmbH, this declaration will cease to be valid.
The following standards as amended have been applied analogously:
DIN EN 12100-1
Safety of machines – Basic concepts, general principles for design, Part 1: Basic terminology, methodology
DIN EN 12100-2
Safety of machines – Basic concepts, general principles for design, Part 2: Technical principles and
specifications
DIN EN 60204-1
Safety of machines - Electrical equipment of machines, Part 1: General requirements
EN ISO 14121-1
Safety of machines – Risk assessment
DIN EN 809
Pumps and pump units for liquids - Common safety requirements
The documents belonging to the machine according to annex VII, part B have been attached.
The machine component must not be put into operation unless it has been proven that the machine
where the machine component shall be installed, corresponds to the regulations of the EC Machinery
Directive (2006/42/EC). The CE mark is applied by the operator as final manufacturer.
Person in charge of documentation:
Thomas Theissl, Kowaldstraße 2, 8570 Voitsberg, Austria,
Marktschorgast, 30.03.2010
Marktschorgast, 30.03.2010
Kaufmännische Leitung
Technical Designer in Charge
Commercial Manager
