Barco HDF-W30LP, User And Installation Manual

Page: 184 / 311

17. Alignment
Image 17-8
Calibrate lens
A Lens Calibration window opens. Select fi rst the desired calibration options by checking the check box before the option and
then select Yes to start the calibration procedure.
Image 17-9
Calibrate lens con
fi rmation
17.7 Warping
Not all models are equipped with a warping unit. For these models, the warping unit is optional.
Overview
• About warping
• Warp activation - deactivation
• Start up manual adjustment
• Warp adjustment principle
• Setting the warping level
• Warp adaptation steps
• Making selections and adjustments
• Keystone correction work fl ow
• Linearity adjustment, work fl ow
• Selecting and changing the position of a speci fi c point
• Scaling the image
• Shifting the image
• Rotating the image
• Hardware Reset
• OSD opacity
• Warp fi le service, load fi le
• Warp fi le service, save to fi le
• Warp fi le service, save as
• Warp fi le service, rename fi le
• Warp fi le service, delete fi le
• Warp fi le service, delete all fi les
• Warp board reset
180 R5906730 HDF WLP SERIES 01/08/2017