Barco HDF-W30LP, User And Installation Manual

Page: 211 / 311

17. Alignment
[On] : data doubling is activated.
[Off] : data doubling is deactivated.
3. Select Horizontal Start and use the ◄ or ► key to set the correct start position.
4. Do the same for Horizontal Size, Vertical Start and Vertical Size.
5. Repeat this action for he second projector.
17.12.7 White level adjustment (blending area)
How to set
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Alignment → Scenergix →
White level .
Image 17-77
Scenergix, white level
2. Press ENTER to select the White level adjustments.
The White level position menu opens.
When Adjustment lines is [On] , the different areas are displayed on the screen.
Image 17-78
White level position
3. Use the ▲ or ▼ key to select one of the four size adjustments and press ENTER to select
Use the ◄ or ► key to change the border of the blending area to the desired position (value between 0 and 255)
R5906730 HDF WLP SERIES 01/08/2017 207