Barco HDF-W30LP, User And Installation Manual

Page: 209 / 311

17. Alignment
[On] : Internal scenergix pattern is displayed.
[Off] : no scenergix pattern is displayed.
10 50 90 130 170 210 250 290 330 370 10 50 90 130 170 210 250 290 330 370
10 50 90 130 170 210 250 290 330 370
10 50 90 130 170 210 250 290 330 370
40 80 120 160 200 240 280 320 360 400 40 80 120 160 200 240 280 320 360 400
Image 17-72
Scenergix pattern
17.12.5 Scenergix adjustment lines
What can be done?
Border lines for the blending areas can be displayed while adjusting the white and black level.
Adjustment lines can be activated when Scenergix pattern is [On].
How to display
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Alignment → Scenergix →
Adjust lines .
Image 17-73
Adjust Lines
2. Press ENTER to toggle between [On] and [Off] .
17.12.6 Data doubling
About data doubling
When a source (A) must be displayed via 2 projectors as one image (B), the vertical and horizontal start position and the size must
be determined so that each projector displays a part of the image. The overlap area can be adjusted with the Scenergix tools.
R5906730 HDF WLP SERIES 01/08/2017 205