Barco HDF-W30LP, User And Installation Manual

Page: 52 / 311

6. Physical installation stand alone cooler
A B
U
1
1
U
Image 6-20
1
Wall side
U U brackets location
A Portrait mode
B Landscape mode
When mounting the cooler assembly, the U brackets which will be mounted on the housing must be fi xed to the indicated position
(U) on the frame.
-
For portrait mode the U brackets must be mounted on top (cooling tubes will be facing upwards) .
- For landscape mode the U brackets are mounted on the left side (cooling tubes will be facing to the left).
Continue with "Installing the brackets on the cooler housing", page 48.
6.5 Installing the brackets on the cooler housing
Necessary parts
• 2 front brackets (U-brackets)
• 2 equal rear brackets
• 4 Hex Screws M5x8
• 4 Hex Screws M5x12
How to install the brackets
1. Fixate the U-bracket (on both sides) to the side of the cooler housing with 2 screws (M5x12).
Image 6-21
2. Fixate the rear brackets to the backside of the cooler housing with 2 screws (M5x8) each.
48 R5906730 HDF WLP SERIES 01/08/2017