Barco HDF-W30LP, User And Installation Manual

Page: 250 / 311

18. Projector Control
Routine setup, in fi nite loop
To repeat the task with a given sequence again and again, check the check box in front of In fi nite .
Routine setup, occurrences
For a limited number of loops, set up the occurrences:
1. Select
Occurrence and press ENTER .
2. Use the ◄ or ► key to change the occurrence.
Image 18-57
Occurrence setup
Occurrence : the number of loops that will take place as set in the recurrence.
E.g; an occurrence of 2 with a recurrence of 3 means that the schedule will be executed at the start date, start date + 3 and due
to the occurrence (=2) also at start date + 6.
Layout selection
1. Select Set layout and press ENTER .
The Load layout menu opens with a list of the available layouts.
2. Use the ▲ or ▼ key to select the desired layout and press ENTER to link the layout to the task.
Image 18-58
Link layout
Light source status
1. Select the desired light source status and press ENTER to select.
The following light source statuses are possible:
-
Turn on : light source will be switched on when the task is started.
- Turn off : light source will be switched off when the task is started.
- No change : no changes to the light source status when the task is started. The light source remains in its current status.
Task name
1. Select Taskname and press ENTER to edit the current proposed name.
2. Use the ◄ or ► key to select the desired character to change.
Use the ▲ or ▼ key to change that character.
Note: Extra characters can be added at the end of the current displayed characters.
Creating the task
1. Select Apply and press ENTER to create the task.
246 R5906730 HDF WLP SERIES 01/08/2017