Barco HDF-W30LP, User And Installation Manual

Page: 171 / 311

15. Layout
15.7 Lens behavior
What can be done ?
Different custom layouts can have different zoom/focus/shift (lens) settings, e.g. when using the projector on 2 different projector
distances or two different screen sizes (same image but 2 custom layouts needed due to different zoom/focus/shift settings).
Adjust the lens settings for the different situations and save these settings each in a different custom layout.
When using only one screen to project the different layouts, the same lens settings can be used for all custom layouts.
When using different screens, different lens settings can be used (settings saved in the custom fi le will be used). To use different
lens settings, it is important that the lens is calibrated so that the lens always returns to the saved position when opening a custom
layout.
Switching from a custom fi le (layout) to a standard fi le (layout) will not change the current lens settings.
How to set the lens behavior
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Layout → Lens behavior .
The Lens behavior menu is displayed.
2. Press ENTER to select.
The Lens behavior window opens.
Image 15-35
Lens behavior setting
3. Press ENTER to toggle lens behavior between [Yes] or [No] .
[Yes] = each layout will use the same zoom/focus/shift settings. The zoom/focus/shift settings of the previous selected layout will
be applied to the next selected layouts.
[No] = each layout will use its own zoom/focus/shift settings. Lens should be calibrated, when using this setting.
4. If [No] is selected, the calibrate lens menu opens.
Image 15-36
Lens calibration
Before different zoom/focus/shift setting can be used, the lens should be calibrated. When a lens change has taken place, always
calibrate the lens before using this setting.
5. If you have to calibrate the lens, select Yes and press ENTER to start the calibration.
During the calibration, a message is displayed. This message disappears when the calibration is fi nished.
Image 15-37
Lens calibration message
R5906730 HDF WLP SERIES 01/08/2017 167