Barco HDF-W30LP, User And Installation Manual

Page: 220 / 311

17. Alignment
Image
Frame Left
3D Sync
Left
Right
Delay Time
3D Sync
Left
Right
Frame Left Frame Right
t
Without output reference delay
With output reference delay
Image 17-94
3D Output reference delay
How to set the delay
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Alignment → 3D Glasses .
The 3D Glasses menu is displayed .
2. Press ENTER .
3. Use the ▲ or ▼ key to select L/R Output Reference Delay
Image 17-95
Output reference dellay
4. Use the ◄ or ► key to change the L/R Output Reference Delay value until the correct value is reached.
17.13.3 3D Sync Loop Through
What can be done?
The incoming 3D sync signal can routed to the 3D sync output connector.
How to activate
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Alignment → 3D Glasses .
The 3D Glasses menu is displayed .
2. Press ENTER .
3. Use the ▲ or ▼ key to select 3D Sync Loop Through .
216 R5906730 HDF WLP SERIES 01/08/2017