Barco HDF-W30LP, User And Installation Manual

Page: 150 / 311

14. Image
• Total lines: Total lines in the source.
How to set up
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Image → Timings .
Image 14-32
Timings window
2. Press ENTER to select.
3. Use the ▲ or ▼ key to select a setting.
4. Use the ◄ or ► key to change the value
Or,
press
ENTER to open the speci fi c adjustment menu.
5. Continue with the other settings in the same way until all timings are set.
For a new measurement, press the Auto Image button on the RCU or local keypad.
14.5.2 Advanced timings, clamp delay - clamp width
About the advanced settings
Clamp delay The time between the trailing edge of the sync pulse and the leading edge of the clamp pulse, in pixels.
Can be any value between 0 and 255.
Clamp width The width of the clamp pulse can be any value between 0 and 255.
Sync
pulse
Clamp
pulse
Clamp
delay Clamp
width
L
ead
in
g
ed
g
e
Tr
ai
lin
g
ing e
d
ge
Image 14-33
146 R5906730 HDF WLP SERIES 01/08/2017