Barco HDF-W30LP User And Installation Manual Download Page 62

Page: 62 / 311

7. Lenses

Image 7-13
Lock lens

8. Check if the lens is really secured by trying to pull the lens out of the lens holder.

7.4

Lens removal

How to remove

1. Support the lens with one hand while you unlock the lens holder by sliding the lock handle towards the “unlocked” position as

illustrated.

Image 7-14
Lens removal, unlock

2. Gently pull the lens out of the lens holder.

Image 7-15
Lens removal

It’s recommended to place the Lens caps of the original Lens packaging, back on both sides of the removed
Lens to protect the optics of the Lens.

R5906730 HDF WLP SERIES 01/08/2017

Summary of Contents for HDF-W30LP
























































































































































































































































































































Search results

Summary of Contents for HDF-W30LP

Reviews:

Related manuals for HDF-W30LP

Brands by name

Popular brands

Barco HDF-W30LP, User And Installation Manual

Search results

Summary of Contents for HDF-W30LP

Reviews:

Related manuals for HDF-W30LP

Brands by name

Popular brands