Barco HDF-W30LP, User And Installation Manual

Page: 43 / 311

6. Physical installation stand alone cooler
• Wall mounting : When this option is chosen, the cooler must be fi xed on the wall in portrait mode or in landscape mode.
In portrait mode, the cooler must be mounted with the cooling tubes up. The other position (cooling tubes down) is not authorized
because coolers are heavy (more or less 15kg) and if the safety clic fails and the cooler screw is not
fi xed, the cooler will simply
fall to the ground! In this orientation it is also less practical to remove a cooler for service.
A B
Image 6-5
A Portrait Mode with cooling tubes to the top.
B Portrait Mode with cooling tubes down (not authorized)
In landscape mode the cooler must be mounted with the cooling tubes to the left. The other position (cooling tubes to the right)
is not authorized due to technical constraints. Functioning and lifetime of internal pump could be impacted if the unit is installed
in this position.
A
B
Image 6-6
A Landscape Mode with cooling tubes to the left (only one authorized position).
B Landscape Mode with cooling tubes to the right (not authorized).
6.2 Assembling the housing
Housing parts
The housing parts are delivered as a fl at pack and should be mounted together at the customers side.
R5906730 HDF WLP SERIES 01/08/2017 39