Barco HDF-W30LP, User And Installation Manual

Page: 115 / 311

13. Input
Image 13-2
Select source
13.4 Advanced Settings
Overview
• About Input Setup
• Input con fi guration
• DVI - RGB input
• SDI input
• 5 cable input
• HDMI - DisplayPort input (3D input module)
13.4.1 About Input Setup
Overview
Each input module must be con fi gured before these module can be used. This con fi guration is necessary so that the projector knows
which type of signal is connected to its input.
The projector has 4 input slots. Slot 1 and 2 is fi lled up by default with a DVI and Dual SDI input. Slot 3 and 4 can be fi lled up with
optional input modules. Identical modules are allowed.
13.4.2 Input con fi guration
3D item in the Input menu is grayed out when no 3D module is inserted in slot 3 or 4.
How to change?
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Input → Advanced Settings .
2. Press ENTER .
The Advanced Settings window is displayed with the actual situation fi lled out.
3. Use the ▲ or ▼ key to select an input
Press ENTER to open the selection menu which will be different from input type to input type.
Image 13-3
Advanced settings, input selection
13.4.3 DVI - RGB input
How to select
Select DVI / RGB and press ENTER to open the selections
R5906730 HDF WLP SERIES 01/08/2017 111