Barco HDF-W30LP, User And Installation Manual

Page: 119 / 311

13. Input
How to set up
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Input → Input locking .
2. Press ENTER .
The Input locking window is displayed with the current selection.
3. Use the ▲ or ▼ key to select a input to lock on.
Image 13-11
Input locking
Input on Main window Output is locked on the selected source of the main window
Input on PIP window Output is locked on the selected source of the Pip window
Input 1 Output is locked on input 1
Input 2 Output is locked on input 2
Input 3 Output is locked on input 3
Input 4 Output is locked on input 4
Free run Output is locked on an internal sync (60 Hz or manual setup)
When Input locking is set to a speci fi c input and there is no sync signal available, the locking will be switched
to Free run without changing the user settings. Once the sync is available, it applies again the user settings.
Options for Free Run
When free run is selected, radio button selected, then the Free Run Options become available.
Image 13-12
Free run options
Use the ▲ or ▼ key to select Fixed 60 Hz or Manual and press ENTER to select.
Fixed 60 Hz: locking is done on an internal sync of 60 Hz
Manual locking is done on the indicated vertical frequency which can be changed by the user (between 24 Hz
and 60 Hz).
To change the locking frequency for Manual, use the ▲ or ▼ key to select Vert freq and press ENTER to activate.
R5906730 HDF WLP SERIES 01/08/2017 115