Barco HDF-W30LP, User And Installation Manual

Page: 192 / 311

17. Alignment
Or,
press
ENTER when an item is selected and use the 4 arrow keys to adjust.
Image 17-27
Warping, keystone
5. Move the corner points to the desired position.
Image 17-28
Keystone adjustment
17.7.9 Linearity adjustment, work fl ow
Adjusting vertical and horizontal linearity
1. Select the 2 x 2 adjustment level. See "Setting the warping level", page 185.
The default selected anchor point is the left top corner of the image.
2. Select the desired warp area.
Depending on the selected area only the points in that area will be adjusted.
3. Select Linearity.
4. Select within Warp Adaptations , Horizontal or Vertical to adjust the corresponding keystone.
Or,
press
ENTER when an item is selected and use the 4 arrow keys to adjust.
Image 17-29
Warping, Linearity
5. Adjust the horizontal and vertical linearity.
To fi ne tune this adjustment, select a speci fi c area and add extra anchor points by changing the warp level.
188 R5906730 HDF WLP SERIES 01/08/2017