5. Troubleshooting
Code 7803: “12V voltage high” (Error)
Situation
Solution
Malfunction Switched mode power
supply
Check the 12V LED on the SMPS board. Replace SMPS board.
Code 7808: “Mains voltage low” (Error)
Situation
Solution
The mains voltage applied to the
input pins of the Switched mode
power supply is below specs.
1.
Check if the mains voltage applied to the projector is within specs. See mains
voltage meter above the projector ON/OFF switch (reference 1 image 5-43).
Minimum input voltage is 200V AC.
2.
Ensure that the mains voltage doesn’t drop below spec when the lamp is ignited. If
this is the case, use a better power cord extension cable between the commercial
net and the projector mains input socket.
3.
Check if the power distribution system of the building is able to deliver the required
power for the projector.
Malfunction Fan Control Board.
Replace the Fan Control Board. See "Replacing the Fan control board", page 278.
Malfunction Switched mode power
supply
Replace the Switched mode power supply. See "Replacement of the SMPS board",
page 166.
1
Image 5-43
Code 7809: “Mains voltage low” (Warning)
Situation
Solution
The mains voltage applied to the
input pins of the Switched mode
power supply is below specs.
1.
Check if the mains voltage applied to the projector is within specs. See mains
voltage meter above the projector ON/OFF switch (reference 1 image 5-43).
Minimum input voltage is 200V AC.
2.
Ensure that the mains voltage doesn’t drop below spec when the lamp is ignited. If
this is the case, use a better power cord extension cable between the commercial
net and the projector mains input socket.
3.
Check if the power distribution system of the building is able to deliver the required
power for the projector.
Malfunction Switched mode power
supply
Replace the SMPS. See "Replacement of the SMPS board", page 166.
Malfunction Fan Control Board.
Replace the Fan Control Board. See "Replacing the Fan control board", page 278.
Code 7810: “Mains voltage high” (Warning)
Situation
Solution
The mains voltage applied to the
input pins of the Switched mode
power supply is above specs.
Check if the mains voltage applied to the projector is within specs. See mains voltage
meter above the projector ON/OFF switch (reference 1 image 5-43). Maximum input
voltage is 240V AC.
Malfunction Switched mode power
supply
Replace the Switched mode power supply. See "Replacement of the SMPS board",
page 166.
Malfunction Fan Control Board.
Replace the Fan Control Board. See "Replacing the Fan control board", page 278.
74
R5905312 HDF W SERIES 24/01/2013
Summary of Contents for HDF W series
