Barco HDF W series, Service Manual

Page: 187 / 337

12. Start Pulse Generator
12.3 Removal of the start pulse generator
To remove or install the start pulse generator you have to remove the side cover, the back cover, the lamp
cover and the lamp house
fi rst.
Necessary tools
• 10 mm nut driver.
• 3 mm Allen key.
• 6 x 120 mm fl at screw driver.
How to remove the start pulse generator?
1. Disconnect the SPG cables from the “LAMP OUT” pins of the LPS module. Use for that a 10 mm nut driver.
Caution: Do not loose the washers which fi t between the fi xation nuts and the cable eye.
Tip: Place the washers and nuts back upon the output pins.
Image 12-2
Disconnect SPG cables
2. Remove the cover of the start pulse generator as illustrated. This cover is secured with 5 hexagon socket head cap screws. Use
for that a 3 mm Allen key.
Image 12-3
SPG cover removal
3. Release the 3 captive screws (1) of the start pulse generator as illustrated. Use for that a fl at screw driver.
R5905312 HDF W SERIES 24/01/2013 183