Balluff IO-Link BES M12EH1-L01C40B-S04G-L04, Configuration

Page: 175 / 188

www.balluff.com 81 english
6.5 Pin Assignment
6.5.1 Description
Two different internal digital signals are available that can
be output or read in at the pins of the device.
Pin 4 and pin 2 can be configured with the following
functions:
Pin 4:
Digital Output
Pin 2:
– Digital Output
– Digital Input
6.5.2 ISDU
Name Index Subindex Access Length Data Type Data
Storage
Default
Pin 4 Function 0x0090 (144) 0 R/W 2 bytes Yes
Behavior IO-Link 1 R/W 1 byte ENUM 0x00 Inactive
Mode 2 R/W 1 byte ENUM 0x01 digital
output
Pin 4 Digital
Configuration
1)
0x0091 (145) 0 R/W 4 byte Yes
Signal Source 1 R/W 2 bytes ENUM 0x0038
ADSS 1
Logic 2 R/W 1 byte ENUM 0x00 normal
Type 3 R/W 1 byte ENUM 0x02 push
pull
Pin 2 Function 0x0093 (147) 0 R/W 2 bytes Yes
Behavior IO-Link 1 R/W 1 byte ENUM 0x01 normal
operation
Mode 2 R/W 1 byte ENUM 0x01 digital
output
Pin 2 Digital
Configuration
1)
0x0094 (148) 0 R/W 4 byte Yes
Signal Source 1 R/W 2 bytes ENUM 0x0038
ADSS 1
Logic 2 R/W 1 byte ENUM 0x00 normal
Type 3 R/W 1 byte ENUM 0x00 PNP
1)
The settings in the
digital configuration
are only used if the pin was configured as a digital output or digital input.
Tab. 6-11: Pin assignment – ISDU
The settings of this device function are not variant-
specific and do not change in the event of a
variant change (e.g. from ADSS to LSSC). As a
result, the
Signal Source
setting must be adjusted
to the selected profile if necessary.
6
System Functions (continued)
BES M12EH1-L01C40B-S04G-L04 / BES M18EH1-L01C80B-S04G-L04
Inductive sensors