BADU JET Smart, Translation Of Original Operation Manual, Page: 86 / 316

Installation
32 EN 06|2020
 Adjust minimum diameter of the electrical pipes to
accommodate the motor output and pipe length.
 Do not bend or squash the pipes.
 If hazardous situations can occur, provide an emergency off
switch according to DIN EN 809. The builder/operator must
make a decision according to this standard.
5.4.1 Counter swim unit electrical connection
 The circuit is wired ready for connection. The connections
are carried out in accordance with the wiring diagram.
 Connect the pneumatic hoses of the pneumatic buttons with
the control box.
 The control box may only be mounted to the existing holes.
Connection onsite:
• Ground fault circuit interrupter I
FN
≤ 30 mA
• Fuse 1-phase 230 V/3-phase 400 V safety fuse 16 A slow or
16 A circuit breaker.
• Short circuit breaking capacity I
CN
≤ 6 kA
• All-pole emergency off switch with 0 and 1 labelling.

A connection has to be provided for equipotential bonding,
that is connected with the earthing strap.
Further information is provided in the connection diagram. The
above-mentioned parts are not included in delivery and must be
provided on site for the installation of the unit.