USER’S MANUAL
28
∗∗∗∗
F 0 7 9 0 4
∗∗∗∗ ∗∗∗∗
11
K
...
∗∗∗∗
∗∗∗∗
F 0 7 9 0 4
∗∗∗∗ ∗∗∗∗
12
L
...
∗∗∗∗
∗∗∗∗
F 0 7 9 0 4
∗∗∗∗ ∗∗∗∗
13
M
...
∗∗∗∗
SET11
0
REGISTER CHIT
SET12
0
TIME REG CHIT
SET13
0
VAT RECEIPT
6.2.12
Setting 11 :Register chit
With this setting you choose how the labelling machine is to
operate with regard to the register chit. To do so:
1. Enter general set-up mode and seek parameter 11,
whose 4 possible values mean the following:
0. the register chit is not issued.
1. With cash register chit and bar code on the
receipt.
2. With register chit but bar code on the register
chit.
3. With register chit and the bar code is printed on
the receipt and chit.
2. Use the numeric keyboard to enter the required value .
3. Press
∗∗∗∗
to save the change made.
6.2.13
Setting 12: Distance Register chit
With this setting you choose the time between the printing of
the receipt and the register chit. To do so:
1. Enter general set-up mode and seek parameter 12,
whose ten possible values mean the following:
0 – The chit is printed on pressing
∗
∗
∗
∗
or 10 seconds
later.
1 to 9 – Number of blank lines between the receipt
and the register chit.
2. Use the numeric keyboard to enter the required value
3. Press
∗∗∗∗
to save the change made.
6.2.14
Setting 13: Print VAT on receipt
This setting enables or disables the printing of VAT. To do
so:
1. Enter general set-up mode and seek parameter 13,
whose two possible values mean the following:
0.
VAT is printed on receipt.
1.
VAT is not printed on receipt.
2. Use the numeric keyboard to enter the required value
3. Press
∗∗∗∗
to save the change made.