INDICATOR-LABELLER BLP-545
3
13
∗∗∗∗
F
∗∗∗∗
F 0 7 9 0
1111
TOT3
2
∗∗∗∗
∗∗∗∗
F 0 7 9 0
7
...
∗∗∗∗
F
∗∗∗∗
F 0 7 9 0
T
C. 1P.L.U. 01
T4.001. 0 M.
Prog.
C
1
C
2
Prog.
VAT 1
00.00
VAT 1
00.08
VAT 2
00.00
VAT RATES
Prog.
Prog. tar
1
0.050
TARE
15. Enter text 4. It is a line of text which allows 256 bytes in
length, with a capacity for 252 letters.
If they are ingredients, up to 128 Ingredients.
Text and ingredients can be combined on the same line, and
can be linked to other lines of ingredients.
There can be up to 100 PLU with this line of text.
Press
∗∗∗∗
to save the item. Move on to program the next item
or press F to quit to the initial programming position.
16. Copy of PLU to PLU:
1. Enter programming
∗∗∗∗
F 0 7 9 0
2. Press 1 and select the PLU.
3. Press TOT3 .
4. Enter the new PLU number
5. Press
∗∗∗∗
to store.
- If the PLU does not exist, it is created.
- If the PLU exists, it is written over.
3.3
PROGRAMMING VAT RATES
Each item programmed in the LP-2550 can be assigned one
of the 5 VAT rates to be defined as follows
1. Press the sequence
∗∗∗∗
F 0 7 9 0 to enter
programming.
2. Press 7 to select programming VAT rates.
The VAT rate to be programmed will show up on the display.
3. Use the numeric keyboard to enter the value to be
assigned in %. Use C to correct.
4.
Press
∗∗∗∗
to save the data: you then move on to
program the next rate. Press F to quit to the initial
programming position (point 2).
3.4
PROGRAMMING TARES
Take the following steps in order to assign the pre-defined
tares:
1.
Press the sequence
∗∗∗∗
F 0 7 9 0 to enter
programming.
2.
Press T to select programming of tare types.
The value of the first tare will show up on the display.
