Bacsa BLP-545, User Manual

Page: 23 / 71

INDICATOR-LABELLER BLP-545
3
17
∗∗∗∗
F 0 7 9 0
+
X
X
X
X
X
∗∗∗∗
SHIFT TOT3
∗∗∗∗
Prog.
Printing p.
Print dist 025
DIST SALIDA
Printing p.
Contrast 8
CONTRAST
Printing p.
Label for 01
LABEL FORMAT
Printing p.
Header 2
HEADER
Printing p.
Receipt end
3
RECEIPT END
Printing p.
Opt.d.head 32
DIST OPTO-CAB
Printing p.
Format tot00
TOTALS FOR
4. SETTING UP THE PRINTER
With this type of programming you can define the way the
labelling machine works. To do so:
1. Press the sequence
∗∗∗∗
F 0 7 9 0 .
2. Press +.
3. Use the numeric keyboard to enter the PRINTOUT
DISTANCE value required (length of the label following
the last line printed ). Press X to save the assignation
and move on to program the next parameter.
4. Use the numeric keyboard to enter the CONTRAST
value required (Value between 1-9). Press X to save the
assignation and move on to program the next
parameter.
5. Use the numeric keyboard to enter the LABEL FORMAT
value required (Format 1-20). Press X to save the
assignation and move on to program the next
parameter.
6. Use the numeric keyboard to enter the HEADER value:
0. It backspaces and does not print the header.
1. It leaves the header blank.
2. It backspaces and prints the header.
3. It prints the header.
Press X to save the assignation and move on to program the
next parameter.
7. Use the numeric keyboard to enter the number of blank
lines required from RECEIPT END. Press X to save the
assignation and move on to program the next parameter.
8. Use the numeric keyboard to enter the OPTIMUM HEAD
DISTANC value required (separation between the upper
edge of the label and the first line to be printed).
9. Enter TOTALS FORMAT 1.
10. Enter TOTALS FORMAT 2.
11. Enter TOTALS FORMAT 3.
12. Press
∗∗∗∗
to save the set-up.
4.1 QUICK CHANGE OF PAPER TYPE
1. Press the sequence SHIFT TOT3
2. Choose the operation mode in accordance with section
6.2.4 Setting 04: Paper type.
3. Press
∗∗∗∗