INDICATOR-LABELLER BLP-545
3
43
∗∗∗∗
and
-
.
SHIFT +
∗∗∗∗
F 0 7 9
0
6
F
∗∗∗∗
F 0 7 9
0
7
G
∗∗∗∗
F 0 7 9
0
9
I
Discount mode.
0.000
0.00
0.000 -
0.00
LABEL NO.
0
Post-tare
1
Repeat
Totals
0
Dens EAN
0
Programming
6.10.2
Discount mode
This mode allows you to discount from the accumulated totals.
1.
Press
∗∗∗∗
and
-
.
You move between discount mode and accumulate mode.
2. The message shows on the alphanumeric line for 1 sec.
Indicating the mode selected.
In discount mode the selected sales are removed from the
accumulated totals.
A label is not printed. A label needing correction can thus be
removed.
Accumulate mode is the one normally used.
The labels are printed and accumulated to the totals.
6.11
LABEL COUNTER
The programming procedure for the 8 digit Label Counter field is
as follows:
8
Press SHIFT + to enter programming.
This field increases each time a label is printed.
To print the label counter on the labels, select field 11.
6.12
POST-TARE OPERATION
This is programmed from * F 0 7 9 0 PLU6 . To enable post-tare
operation, set it to 1.
Post-tare operation works as follows:
1.
Place the product in its packing on the weighing platform.
2.
Select the price and press the corresponding sales
assistant key.
3.
The data is saved in the memory at this moment but the
sale is not yet effected. Place the empty pack on the
platform, select the price again and the sales assistant key
again.
4.
At this moment the sale is effected. The pack is used as the
tare weight, and the net weight is the initial weight minus the
weight of the pack that was weighed afterwards.
6.13
COPIES OF TOTAL LABELS
This enables copies of total labels to be made.
This is programmed from * F 0 7 9 0 PLU7
0.
No copies made.
1.
Number of copies required.
6.14
EAN-13 DENSITY
This permits the EAN-13 density to be programmed.
This is programmed from * F 0 7 9 0 PLU9
0.
Normal.
1.
x2.
2.
x3.
