INDICATOR-LABELLER BLP-545
3
23
∗∗∗∗
F 0 7 9 0
7
××××
X
∗∗∗∗
F 0 7 9 0
7
X
1
A
∗∗∗∗
F 0 7 9 0
4
...
∗∗∗∗
...
∗∗∗∗
Prog.
Total reset
1
START SCALE
Prog.
Spec. clear 1.
SPECIAL CLEAR
Prog.
GROUP
00
GROUP NUMBER
WHO. L 10000
WHOLESALER L.
6.
SET-UP
Operation of the LP-2550 can be personalized by taking the
following steps and assigning the correct values to set-up
parameters.
.
6.1
TOTAL CLEAR OF THE LP-2550
1. Press the
∗∗∗∗
F 0 7 9 0 keys to enter programming.
2. Press X 7 times to do a total clearance of the LP-2550.
The F or
∗∗∗∗
keys cancel the clearance in process.
ATTENTION: If a total memory clear is done on the
labelling machine, the label formats programmed and
logos loaded will be lost.
6.1.1
Items clearance
It clears the entire memory except for the label formats and
logos:
1. Enter programming.
2. Press the 1
ª
key 7 times.
6.2
GENERAL SET-UP
When taking any of the following steps, keep in mind the
table below:
Key
Function
F
Return to the initial programming
position.
C
Clear data.
X
Print set-up.
XX
Y
Access parameter xx directly.
∗∗∗∗
Save the value and move on to the
next.
1. Press the sequence
∗∗∗∗
F 0 7 9 0 to enter
programming.
2. Press
4444
to select programming of set-up parameters.
3. Enter the group number to which the LP-2550 belongs
(from 00 to 99). Press the
∗∗∗∗
to move on to program the
wholesaler’s limit.
4. Enter the value (6 digits) of the amount above which a
customer is considered a wholesaler.
Press
∗∗∗∗
to save the data. Consult the sections outlined below
to set up the other parameters.
