Bacsa BLP-545, User Manual

Page: 50 / 71

USER´S MANUAL
44
∗∗∗∗
y
25
Y
PLU3
∗∗∗∗
F 0 7 9 0
10
J
Opto 2
0
Repeat
Labels 0
6.15 CONTROL OF LABEL AT EXIT
This permits the detector of labels at the exit to be activated or
deactivated. Test mode must be activated for this purpose.
To enter test mode, switch on the equipment, and when the
countdown commences, press * and 25
Y
simultaneously. In test
mode, press PLU3
0. Deactivated
1. Activated
6.16 NUMBER OF COPIES OF LABELS
In this parameter, the user can program the number of copies of
labels to be printed on each operation.
The operative is the following:
1. Enter in programming mode by pressing
∗∗∗∗
F 0 7 9 0 .
2. Press the key PLU 10 .
3. Select the number of copies (0-99).
7. PROGRAMMING LOGOS
The LP-2550 labelling machine affords the possibility of Printing Logos on both the receipt and the
labelling machine.
Up to 32 logotypes numbered from 0 to 31 can be programmed. To load these logos you must use
DibalRMS V.1.25 or superior.
As far as size is concerned, the maximum one for each of the logos is150mm long and the width must
always be a set 54mm (432 pixels).
To load logos you are recommended to have prior knowledge of how to use DibalRMS
7.1 PRINTING LOGOTYPES
•
To print a LOGO ON A LABEL:
- Go to programming or label format, section 5.2.
- Call up field 92. This field does not have an X coordinate, the Y co-ordinate has a maximum of
150mm (1200 dots).
- In field t (logo type), choose the number of the logo to be represented (from 0 to 32, all of
which are programmable).
- Logos can only be printed in label mode In the LP-2550. Logos are not printed in receipt
mode.
7.2 LOADING LOGOS
The DibalRMS (Version superior to 1.25) is used. With the labelling machine you can incorporate up to
32 logos from any image or one developed by the user. Remember that the larger the image, the
longer it will take for it to be printed on the label.
- The size of each of these images is 5.4cm X 15cm.
- The size in pixels must be, in both width and length, a multiple of 8. The maximum size of the
image would be 432 pixels wide (54mm) X 1200 pixels long (150mm). The width must always
be 432 pixels.
- The format of the image must be BMP and in black and white. To this end, you are
recommended to use Windows “Paint” program to make the drawing.
- .