INDICATOR-LABELLER BLP-545
3
33
∗∗∗∗
F 0 7 9 0 4
∗∗∗∗ ∗∗∗∗
27
Ñ
∗∗∗∗
∗∗∗∗
∗∗∗∗
F 0 7 9 0 4
∗∗∗∗ ∗∗∗∗
27
Ñ
∗∗∗∗
∗∗∗∗
∗∗∗∗
F 0 7 9 0 4
∗∗∗∗ ∗∗∗∗
27
Ñ
∗∗∗∗
∗∗∗∗
∗∗∗∗
∗∗∗∗
F 0 7 9 0 4
∗∗∗∗ ∗∗∗∗
27
Ñ
3x
∗∗∗∗
∗∗∗∗
∗∗∗∗
F 0 7 9 0 4
∗∗∗∗ ∗∗∗∗
27
Ñ
4x
∗∗∗∗
∗∗∗∗
SET80 01 32m
E29CCCCEEEE
SET81 01 32m
E29CCCCEEEE
SET82- 01 0m
E
SET83- 01 0m
E
SET84- 01 0m
E
6.2.29
Setting 80: Bar code on receipt
This setting will only show up in programming if the current
value of setting 14 is 1,3 or 5.
It permits a special bar code to be designed for the receipt.
To do so:
1. Enter general set-up mode and seek parameter 80,
2. Enter the required EAN 13 format (12 letters or
numbers) according to the table in sec. 6.2.14. Use the
alphanumeric keyboard or the character codes Press
∗∗∗∗
to save the change made.
6.2.30
Setting 81: Bar code on label
This setting will only appear in programming if setting 14’s
current value is 2 or 3.
It permits a special bar code to be designed for the label. To
do so:
1. Enter general set-up mode and seek parameter 81,
2. Enter the required EAN 13 format (12 letters or
numbers) according to the table in sec. 6.2.14.
3. Press
∗∗∗∗
to save the change made.
6.2.31
Setting 82: EAN 13 for level 1 totals
This is for designing EAN 13 for level 1 totals. Proceed as
follows:
1.
Enter general configuration mode and find parameter 82
.
2.
Edit EAN 13
3.
Press
∗∗∗∗
to save the change made.
6.2.32
Setting 83: EAN 13 for level 2 totals
This is for designing EAN 13 for level 2 totals. Proceed as
follows:
1.
Enter general configuration mode and find parameter
83
2.
Edit EAN 13
3.
Press
∗∗∗∗
to save the change made.
6.2.33
Setting 84: EAN 13 for level 3 totals
This is for designing EAN 13 for level 3 totals. Proceed as
follows:
1.
Enter general configuration mode and find parameter
84 .
2.
Edit EAN 13
3.
Press
∗∗∗∗
to save the change made.
