USER’S MANUAL
24
∗∗∗∗
F 0 7 9 0
4
∗∗∗∗ ∗∗∗∗
...
∗∗∗∗
∗∗∗∗
F 0 7 9 0 4
∗∗∗∗ ∗∗∗∗
1
A
...
∗∗∗∗
∗∗∗∗
F 0 7 9 0 4
∗∗∗∗ ∗∗∗∗
2
B
...
∗∗∗∗
SET00
3
BAR CODE
SET01
0
CALCULATE CHAN
SET02
0
SET TARE
6.2.1
Setting 00: Bar code
This is to inform the LP-2550 if it is to issue a bar code, and
when it is to do so:
0. Bar code on the receipt when the total is positive.
(Default value)
1. Bar code on the receipt always. If the total is negative, a
zero shows.
2. No bar code.
3. Bar code always, with the absolute value of the amount.
To modify the value:
1. enter general set-up mode and seek parameter 00.
2. Enter one of the previous values, e.g. 3.
Press
∗∗∗∗
to save the parameter and move on to program the
next parameter.
6.2.2
Setting 01: Calculating change
This enables the LP-2550 to calculate the change before
printing the receipt. To do so:
1. Enter general set-up mode and seek parameter 01,
whose two possible values mean the following:
0. No calculation of change. (Default value)
1. With calculation of change.
2. Use the numeric keyboard to enter the required value .
3. Press
∗∗∗∗
to save the change made.
6.2.3
Setting 02: Set tare
This enable the LP-2550 to fix the tare or not. To do so
1. Enter general set-up mode and seek parameter 02,
whose two possible values mean the following:
0. Tare can be fixed (Default value)
1. Tare cannot be fixed.
2. Use the numeric keyboard to enter the required value .
3. Press
∗∗∗∗
to save the change made.