INDICATOR-LABELLER BLP-545
3
19
++++
...
TOT2
∗∗∗∗
F
∗∗∗∗
∗∗∗∗
F 0 7 9 0
PLU
1
C
X
...
X
...
∗∗∗∗
L. 21
4
CONTRAST
L. 214 P.01 0 M.
L. 214 P.01 0 M.
Prog.
FOR. 0
FORMAT
FOR 1.
AN. 000 LA.000
FORMAT
FOR. 0
FOR. 0
FORMAT
FOR 1.
AN. 432 LA. 000
FORMAT
FOR 1.
AN. 432 LA.480
FORMAT
4.
The third digit to appear indicates printing contrast. Enter
value 4 for good printing quality in the receipts (default
value).
Press
++++
to move on enter the text of the line being
programmed.
5. Enter the text of the corresponding line with the use of
the alphanumeric keyboard or enter the character codes
(10.5 Character codes).
Centre the line of text by pressing TOT2 after entering the
last character of the line.
6. Press
∗∗∗∗
to save the line just programmed. You move on
to program the following line which brings you back to
the point 4..
7.
Press F to return to the initial programming position and
then
∗∗∗∗
to return to the normal working mode of the
labelling machine.
5.2
LABEL DESIGN
To design one of the 20 possible label formats, take the
following steps:
(to quit this mode at any stage, press F )
1. Enter programming by pressing
∗∗∗∗
F 0 7 9 0 .
2. Press PLU .
3. Enter the label format you require to program (a number
from 1 to 20).
Press C to select another format.
Press X to move on to define the size of the label
4.
Enter the width of the label in terms of the dots of the
labelling machine’s printer. To do so, multiply the values
in millimetres by 8 (the maximum value which can be
entered is 432)
Press X to go on to define the height of the label.
5. Enter the height of the label in terms of the dots of the
labelling machine’s printer. To do so multiply the values
in millimetres by 8 (the maximum value which can be
entered is 1200-150mm-)
Press
∗∗∗∗
