Azbil SLX 110, User Manual

Page: 59 / 168

Azbil Corporation Operation
Model SLX 110/120 - Smart displacement type level transmitter 2-19
2-5 : Operation stop
Turn the power off.
When the instrument is not used for a long period of time (operation stopped) after
the installation, it is recommended to remove the float.
2-6 : Operation using SFC
The SFC is used to check measured data and to change the set data of this instrument.
This chapter explains how to use the SFC to communicate with this instrument and
gives the basics to be able to operate from the SFC.
For details of the SFC, see the SFC Instruction Manual (CM2-SFC100-2001).
The SFC that can be used with the SLX is SFC160/260 Ver.8.0 or newer.
WARNING
Always the SFC is a non-hazardous location, otherwise an explosion can result from
an electrical discharge.
Principles of key operation
The following points should be noted when using the SFC keys.
• Slowly and firmly press the keys. If the screen does not respond, it means that the
key input has not been accepted. Slowly press the key once again.
• If a key is pressed and the screen of the data display window does not change,
the key may be invalid at that stage or the key may not be used in this instrument.
Press necessary keys.
• If you have pressed the wrong key and want to redo the procedure from the
beginning with the original factory settings, see Chapter 4 : Repair.