Azbil SLX 110 User Manual Download Page 47

Page: 47 / 168

Azbil Corporation

Operation

Model SLX 110/120 - Smart displacement type level transmitter 2-7

Communication start

WARNING

• While the process is in auto-control mode, do not start communication between

the SFC and this instrument. This may temporarily change the output drastically,

producing a dangerous operation condition.

• Before starting communication with this instrument, be sure to change the control

loop of the process to manual control.

Step

Button

Procedure

SFC screen

Turn on power to the SFC.

LOOP IN MANUAL ?

SHIFT

Check to see if the control loop is in

manual operation.

If “yes”, press the [ENTER] key.

PRESS ID

DE READ

Press [ID]. Communication with this

instrument starts.

TAG NO.
WORKING...

TAG No. appears.

SLX TAG NO.
SLX TAG - 0001

CLR

( No )

Pressing CLR makes communication

ready to start.

SLX TAG - 0001
READY...

Summary of Contents for SLX 110









































































































































































Search results

Summary of Contents for SLX 110

Reviews:

Related manuals for SLX 110

Brands by name

Popular brands

Azbil SLX 110, User Manual

Search results

Summary of Contents for SLX 110

Reviews:

Related manuals for SLX 110

Brands by name

Popular brands