AVYCON H5300 series, User Manual

Page: 163 / 192

163
11.5 Operation
11.5.1 DVR/SPD Mode Conversion

Press “System ID” + “ ” to enter DVR control Mode.

Press “Speed Dome Camera ID” + “ ” to enter PTZ camera control Mode.
Example

If a user wishes to connect to SYSTEM ID 3 DVR then press Num Pad “ “+ “ ”.

If a user wishes to connect to Speed Dome camera ID 3 then press Num Pad “ “ + “ ”.
11.5.2 DVR Control Mode
11.5.2.1 Connection

If the DVR Control Mode is selected followings will display on Keyboard LCD and Live OSD as “KBD: #” on the right-bottom
corner.

Then, a user should be able to operate the DVR functions by CP1300.
11.5.2.2 Buttons

In DVR control mode, all buttons are operated according to texts written on each button. The functions are same as Front
buttons of DVR as follows:
-
: Change display mode on Live and Playback in sequence of 1CH>4CH>9CH>16CH>1CH.
-
: Activates and the AUDIO function and change Audio channel
-
: Turn on/off Sequence function. Only supports 1CH, 4CH, 9Ch display mode
-
: Pop up System Log
-
: Active Emergency recording.
-
: Pop up Search Menu in Live or switches to Live in Playback mode.
-
: Pop up Archive window.
-
: Change the channel of a monitor connected to the Spot output.
-
: Freeze a current image in Live mode ONLY.
-
: Pop up Setup window.
-
: Enter PTZ control mode and able to use PTZ function of DVR.