AVYCON H5300 series, User Manual

Page: 126 / 192

126

Device Info
-
Device Name: input the DVR site name which will be displayed on the Server list. Please note that this name has nothing
to do with the ID registered in DVR. Users may create a name that is fairly easy to distinguish.
-
Description: type brief description of the site.
-
IP Address: input IP address or Domain Name of DVR (check with SETUP>DEVICES>Network in DVR).
-
Command Port: input Administrator’s number among port numbers set in DVR (check with SETUP>DEVICES>Network in
DVR). (Default, 5920)
-
Stream Port: INPUT Video/Audio number among port numbers set in DVR (check with SETUP>DEVICES>Network in
DVR). (Default, 5921)
-
User Name: Type authorized ID of the DVR. Default ID is admin.
-
Password: Type corresponding password of the ID. Default Password is 1111.
-
Confirm Password: Retype the password to confirm.

If users want to scan the devices instead of typing the information manually, please Click ‘Scan device’. It will automatically
detect DVR units currently connected to local networks.

Click “Scan Device”, then following ‘Dialog’ will pop up.

Including IP address, the information of connected DVRs in the network will be listed.

Select the one and Click ‘OK’. Then, the following window will pop up.

Please fill out all the necessary information including Device name, Description (not mandatory), User Name and Password
and confirm password. Please note that the User Name and Password have to be same as the DVR setting.

When users want to edit the existing device information, please choose the device and Click ‘Edit.

When users want to delete the existing device information on the list, please select the device and Click ‘Remove’.

If users click the ‘Remove’ button, it will show the message below.
8.3.2.2 Display Setup

Please Click ‘Display Setup’ and the following screen will display.