manualshive.com logo in svg

AVYCON H5300 series, User Manual, Page: 11 / 192

Share
Download
AVYCON H5300 series User Manual Download Page 11

 

11

1. 

Product Features 

1.1 Unpacking 

 This equipment is an electronic appliance, so it should be handled with special care. 

 After unpacking, please check if all the following items are included. 

-

 DVR Main body 

-

 

S Type 

: 

Power Supply Adapter (DC 12V, 3A) and Power Supply Cable 

-

 

A, B and E (4CH) Type

 : Power Supply Adapter (DC 12V, 5A) and Power Supply Cable 

-

 

C, D, E (8, 16CH), F, G (4CH), H, I and J Type

 : Power Supply Adapter (DC 12V, 6.67A) and Power Supply Cable 

-

 

G (8, 16CH) Type

 : Power Supply Cable 

-

 Remote Control With 2 AAA batteries 

-

 Installation CD (CMS Pro Software & User’s Manual) 

-

 Quick Guide 

 

1.2 Service 

 If there is any problem in the product, please refer servicing to a supplier or a distributor with qualified service personnel. 

 

WARNING   

WARRANTY IS VOID IF SEAL OR LABEL IS REMOVED OR DAMAGED. 

 

1.3 System Connection Diagram 

 

 

 S Type – 4 / 8 channel Series DVR

Summary of Contents for H5300 series

































































































































































































Reviews:

No comments