AVYCON H5300 series User Manual Download

Page: 36 / 192

Setup

4.1 Login



For security purpose, a user has to input

the password to enter the setup menu.



Please press

from Display Menu Bar to enter the setup menu and the following screen will display.



In order to use all functions and privileges, log in as ID: admin.



Default Password is “1111”.



After login successfully, following screen will display.



Main menu consists of 4 sub menu.

SYSTEM / DEVICES / RECORD / RELAY



To escape from the setup menu and save settings of DVRs, please Click Exit button on the screen.



A user may use ,

direction keys or mouse Click to exit from Setup. Please Click (



) the EXIT button on the screen.

NOTE

Press AUDIO/ESC in the setup screen. It operates like CANCEL (ESC). During live mode, AUDIO/ESC button operates as on/off of audio

focused channel) and playback mode, it operates like EXIT form playback mode or CLOSE (if any popup existing.)

NOTE

Recording does NOT stop by menu accesses.

Summary of Contents for H5300 series

































































































































































































Search results

Summary of Contents for H5300 series

Reviews:

Related manuals for H5300 series

Brands by name

Popular brands

AVYCON H5300 series, User Manual

Search results

Summary of Contents for H5300 series

Reviews:

Related manuals for H5300 series

Brands by name

Popular brands