AVYCON H5300 series Page 148 User Manual Download

Page: 148 / 192

148



Tap

“

” or “

” to disable Frame skip.



Tap “

” or “

” to enable audio. (1CH display ONLY)



Tap “

” or “

”to disable audio. (1CH display ONLY)



To use Zoom feature, simply pinch and drag in 1CH display. (1CH display ONLY)

NOTE

Audio, Zoom and PTZ are available only in full screen mode. (1channel only)

NOTE

If a user enable frame skip, used memories will be stable and It’s possible to use it on live mode and playback mode.

10.1.9 Snapshot gallery



Users are able to save the snapshot taken with mViewer pro while live monitoring and Playback.



Tap “Snapshot gallery” from main menu.



Select the device and snapshot taken from the selected device will display.



To see other pictures slide finger across the screen.



Tap “

” to send the snapshot to the Photos.



Tap ”

” to delete the selected snapshot.

Summary of Contents for H5300 series

































































































































































































Search results

Summary of Contents for H5300 series

Reviews:

Related manuals for H5300 series

Brands by name

Popular brands

AVYCON H5300 series, User Manual

Search results

Summary of Contents for H5300 series

Reviews:

Related manuals for H5300 series

Brands by name

Popular brands