manualshive.com logo in svg

AVYCON H5300 series, User Manual, Page: 164 / 192

Share
Download
AVYCON H5300 series User Manual Download Page 164

 

164

-

 

, 

, 

, 

, 

  : Playback control in DVR Search Mode. 

-

 

  : View a channel in full screen (by selecting a number with ENTER button). 

 

NOTE

     

 For detailed information on PTZ Mode, please refer to 4.3.5 Camera. 

 
11.5.2.3 PTZ Mode 

 In order to enter PTZ mode, press “Camera ID” + “

“. 

NOTE

     

 PTZ Mode only can be switched from DVR Mode. 

 

 If the PTZ Mode is selected following will display on Keyboard LCD and OSD 

 

 

 Then, a user should be able to operate the PTZ camera with CP1300. 

 

 In PTZ mode, all buttons are operated according to texts written on each button. The functions are same as Front buttons of 

DVR as follows: 

-

 # + “

“ will move to saved Preset point. 

-

 # + “

“ will save new Preset point under #. 

-

 Press “

“ to adjust the Focus. 

-

 Press “

“ to activate the Zoom. 

 

WARNING 

 DEPENDING ON THE PROTOCOL BEING USED BY THE SPEED DOME CAMERA, CONTROLLING CAMERA MENU 

COULD BE DIFFERENT. PLEASE CHECK SPEED DOME CAMERA MANUAL. 

 

11.5.3 SPD Control Mode (Speed Dome) 

11.5.3.1 Connection 

 If the SPD Control Mode is selected followings will display on Keyboard LCD: 

 

Summary of Contents for H5300 series

































































































































































































Reviews:

No comments