manualshive.com logo in svg

AVYCON H5300 series, User Manual, Page: 154 / 192

Share
Download
AVYCON H5300 series User Manual Download Page 154

 

154

 Tap “

” to enable PTZ function. Please refer to 10.2.7 PTZ Control for more detail. 

 Tap “

” to enable audio. 

 Tap “

” to remove Camera Name and Date/Time from OSD. 

 Tap “

” to take Snapshot. 

-  Enter file name and press “

” to save the image. 

 

NOTE

   

Audio is available only in full screen mode. (1channel only) 

 

10.2.7 PTZ  control 

 Users are able to control PTZ with mobile device by touching the screen. 

 Tap “

” or “

” to execute PTZ function. 

 

 

 Tap Arrow for Pan and Tilt movement. 

 Touch “

” to zoom out. 

 Touch “

  ” to zoom in. 

 If users already set up the presets on DVR, users may use them by touching “

”. 

 

10.2.8 Alarm  Out  Control 

 Users are able to manually send Alarm out command with the mobile device. 

 Tap “

” to enable the Alarm Out control and it will display on lower left corner of Live screen. 

 

 Tap the numbers to send out Alarm from the connected DVR to its output source. 

Summary of Contents for H5300 series

































































































































































































Reviews:

No comments