AVYCON H5300 series User Manual Download

Page: 100 / 192

100



Click “Hide Captured Image” to hide the captured images.

6.7.2.7 Audio On/Off



Right click and select Audio On/Off to turn on/off audio from the channel.



Audio On/Off function is applied to only one channel out of all connected channels.

Once audio is on “

” will be changed to show connected audio channel. “

”

6.7.2.8 MIC On/Off



Click right mouse button to turn on/off microphone of PC.



Users can deliver the audio through the speaker connected to DVR by sending the audio from PC where CMS Pro is activated.

6.7.2.9 Instant Recording



Click right mouse button to activate the Instant Recording.



In the Instant Recording, there are three choices of start recording, setup and open folder.



Click Start Recording to record the particular channel that user wants.

Summary of Contents for H5300 series

































































































































































































Search results

Summary of Contents for H5300 series

Reviews:

Related manuals for H5300 series

Brands by name

Popular brands

AVYCON H5300 series, User Manual

Search results

Summary of Contents for H5300 series

Reviews:

Related manuals for H5300 series

Brands by name

Popular brands