AVYCON H5300 series, User Manual, Page: 58 / 192

58

Please Click (

) Emergency and the following screen will display.

The Emergency menu allows a user to set Emergency based recording rates and resolution, when ‘Emergency button pressed.

Each box on Title column shows camera title registered in DEVICES>Camera. A user may not change camera titles here.

Click (

) each box on Resolution column to select recording resolution of a corresponding camera. A user may select one of
360x240(288), 720x240(288), 720x480(576), 960x480(576), 1280x720 and 1920x1080.

Click (

) each box on Frames column to select recording rate of a corresponding camera. Recording rate varies by selected
recording resolution.

Please (

) Pre-Event and the following will display.

Pre-Event is effectively used when a user selects recording mode by Motion, Alarm or Emergency.

Pre-Event feature allows a user to make a DVR to record at the same conditions as defined at Motion, Alarm, and Emergency
for a period of ‘up to’ actual event triggered time.

Please follow the setup procedures below.
①
Click (

) Drop-down list of Duration box to select recording duration (10 second ~ 10 minutes)
②
Click (

) Drop-down list of “Record follows” to apply the same Recording Setting of Motion, Alarm or Emergency for a
period as defined above.
NOTE
Pre-Event recording conditions are dependent on Motion, Alarm or Emergency which is configured by the user.
Emergency
Pre-Event