AVYCON H5300 series User Manual Download

Page: 42 / 192



Then, lists of User will show as follows.



To Edit the User, Select a User from the list and Click (



)



To Delete the User, Select a User from the list and Click (



)

NOTE

Only ‘Admin user’ can access Account menu.

NOTE

E-mail address is not mandatory to create New User but it is necessary to send email notification.

NOTE

A user may create up to 8 Groups and 8 Users per Group.

Login Check



Selectively enable password protection for important operations.



Please check



the operations that wish to enable password protection.

CAUTION

USERS WILL NOT BE ASKED TO ENTER THE PASSWORD FOR OPERATION(S) WHEN PASSWORD PROTECTION IS NOT

ACTIVATED.

4.2.3 Event



Please Click (



) SYSTEM>Event and the following screen will display.

Summary of Contents for H5300 series

































































































































































































Search results

Summary of Contents for H5300 series

Reviews:

Related manuals for H5300 series

Brands by name

Popular brands

AVYCON H5300 series, User Manual

Search results

Summary of Contents for H5300 series

Reviews:

Related manuals for H5300 series

Brands by name

Popular brands