AVYCON H5300 series Page 104 User Manual Download

Page: 104 / 192

104



Users can change the speed of rewind and fast forward from x1 to Extreme. The actual speed may be limited by DVR’s network

uploading bandwidth.



Users can use Right click to access Audio On/Off, Digital Zoom and Capture and Print Screen.

Audio On/Off: A user can enable audio function. If Audio is connected Audio Status will change.

Enter Digital Zoom: A user can use Digital zoom. Please refer 6.7.2.4 Digital Zoom.

Capture and Print Screen: A user can capture image. Please refer 6.7.2.6 Screen Capture and Image.

NOTE

Audio and Digital Zoom are supported only in 1CH display mode.



In the playback menu, users are able to search the data from the beginning of the day or from the cursor position.



Or just simply click on the time line users want, and then click “

” button on the left.



Click “Archive” button to save certain channels as a video file.

Summary of Contents for H5300 series

































































































































































































Search results

Summary of Contents for H5300 series

Reviews:

Related manuals for H5300 series

Brands by name

Popular brands

AVYCON H5300 series, User Manual

Search results

Summary of Contents for H5300 series

Reviews:

Related manuals for H5300 series

Brands by name

Popular brands