AVYCON H5300 series User Manual Download Page 152

Page: 152 / 192

152

10.2.4 Connection



Tap on Device Name to connect the DVR to mobile device.

10.2.5 Live View (Portrait View)



To select other channels,

- Slide finger from Right to Left to ascend. (1

→

3 …… 14

→

16)

- Slide finger from Left to Right to descend. (16

→

14 …… 3

→



Tap “

” to enable Landscape view when the device is tilted



Tap

“

”

to enable Frame skip or Tap

“

”

to disable Frame skip.



Tap “

” to enable PTZ function. Please refer to 10.2.7 PTZ Control for more detail.



Tap “

” to enable Alarm Out control. Please refer to 10.2.8 Alarm Out Control for more detail.



Tap “

” to enable audio or Tap “

” to disable audio



Tap “

” to change to other Device if there is any.



Tap “

” to switch to Search mode.

Summary of Contents for H5300 series

































































































































































































Search results

Summary of Contents for H5300 series

Reviews:

AVYCON H5300 series, User Manual, Page: 152 / 192

Search results

Summary of Contents for H5300 series

Reviews: