Avery Dennison Monarch Tabletop Printer 2, Reference Manual

Page: 51 / 206

Classification: Avery Dennison – Public Defining Fields 3-3
T7. gap Num ber of dots between c harac ters in 203 dpi (or 300 dpi).
Range:
0 to 99 . 0 is the default.
For m onos pac ed fonts , the additional s pac ing is added to the
exis ting inter-c harac ter gap. This is als o true for proportionally
s pac ed fonts ; however, the inter-c harac ter gap varies with
c harac ter c om binations .
Any num ber other than 0 affec ts the field width. Default s pac ing:
Standard 3 dots
Reduc ed 1 dot
Bold 3 dots
OCRA-like 3 dots
HR1 3 dots
HR2 3 dots
CG Trium virate™ Typefac e Bold v arie s with e ach le tte r
CG Trium virate™ Typefac e v arie s with e ach le tte r
EFF Swis s Bold v arie s with e ach le tte r
Note : HR1 and HR2 are only us ed with the UPC bar c ode fam ily and
m us t be num eric .
T8. font Style of font. 1 is the default. Options :
1 Standard 10 CG Trium virate™ Typefac e Bold
2 Reduc ed 11 CG Trium virate™ Typefac e
3 Bold 15 7 pt. CG Trium virate™ Typefac e
4 OCRA-like 16 9 pt. CG Trium virate™ Typefac e
5 HR1 17 11 pt. CG Trium virate™ Typefac e
6 HR2 18 15 pt. CG Trium virate™ Typefac e
50 EFF Swis s Bold (TrueType® Sc alable)
56 PaxarSym bols
Or a valid downloaded font s elec tor num ber.
Fonts 5 and 6 are for num eric data only. The CG Trium virate™
typefac es s upport only the ANSI and DOS Code Page 437 and
850 Sym bol Sets . The s c alable font does not s upport Code Page
1256 (Arabic ). See
Appendix C for m ore inform ation.
T9. hgt m ag Height m agnifier, 1 to 7 tim es ( 4 to 255 points for
s c alable/downloaded TrueType fonts ). 1 is the default. Us e a
m agnifier of 1 with proportionally s pac ed fonts , bec aus e
c harac ters los e s m oothnes s at higher m agnific ations . See
Appendix B, “
Fonts ,” for m ore inform ation about fonts .
T10. wid m ag W idth m agnifier, 1 to 7 tim es ( 4 to 255 points for
s c alable/downloaded TrueType fonts ). 1 is the
default.Proportionally s pac ed fonts do not have a s et width. To
es tim ate the s iz e of the field, us e the letter “W ” for the wides t
field or an “L” for an average width field. Find the s elec ted font
and the des ired width in Appendix B, “
Fonts .”