Avaya IP Office Phone Manager, Manual, Page: 312 / 324

Share

297 pages before
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324

Page: 312 / 324

Avaya IP Office Phone Manager Manual Download Page 312

Phone Based Administration

Page 312

- Issue 6a (Thursday, February 22, 2018)

IP Office Basic Edition

Comments on this document? [email protected]

17.11 Memory Card Startup/Shutdown

Before removing either of the SD cards from the system control unit, the card should be shut down. This ensures that file
writes to the card and other operations are completed before the card is removed.

Note that the System SD card should only be removed for maintenance purposes. While the System SD card is shut
down, no voicemail is available and licensed features will only run for up to 2 hours.

The System SD and Optional SD LEDs on the rear of the system are extinguished when no card is present or when the
card has been shutdown and can be removed.

·

This procedure is not listed when using the

Next Procedure

or

Previous Procedure

buttons to select a

procedure.

1408/1416/9504/9508 Phone

1. At either of the first two extensions on the system, press

Admin

.

·

To do the above during a call, you may need to press the

PHONE

button to display the

Admin

soft key

option. If you access phone administration during a call, only the

SPEAKER

,

MUTE

and

HEADSET

buttons still affect the connected call.

2. Use the

up or down

arrow buttons to scroll the display to

System Administration

. When highlighted, press

Select

.

3. Dial

#733

. The display will show

Select Memory Card

.

4. Enter

1

for the System SD card or

2

for the Optional SD card.

·

If the selected card is current running, the option

Immediate Shutdown

is displayed. To start the process

press the

Enter

button, otherwise press #. The status will change to

Shutting Down

and then

Shut Down

.

Check that the LED for that card slot is extinguished before removing the card.

·

If the selected card has been shut down, the option

Start Up

is displayed. To start the process press the

Enter button, otherwise press #. The status will change to

Starting Up

and then

Started Up

.

·

If the selected card is not present, the message

No Card

is displayed.

·

If the selected card is currently performing another process which should not be interrupted

System Busy

is

displayed.

·

Exit programming by pressing

PHONE

. Alternatively use the

Back

button to move to another menu.

M7324/M7324N/M7310/M7310N/T7316/T7316E Phone

1. At either of the first two extensions on the system, press

Feature **config

(ie.

Feature **266344

).

·

If the system has a

system password

set, it is requested. Enter the password.

2. The phone displays

System Admin

.

3. Dial

#733

. The display will show

Select Memory Card

.

4. Enter

1

for the System SD card or

2

for the Optional SD card.

·

If the selected card is current running, the option

Immediate Shutdown

is displayed. To start the process

press the

Enter

button, otherwise press #. The status will change to

Shutting Down

and then

Shut Down

.

Check that the LED for that card slot is extinguished before removing the card.

·

If the selected card has been shut down, the option

Start Up

is displayed. To start the process press the

Enter button, otherwise press #. The status will change to

Starting Up

and then

Started Up

.

·

If the selected card is not present, the message

No Card

is displayed.

·

If the selected card is currently performing another process which should not be interrupted

System Busy

is

displayed.

·

To exit phone based administration at any time, press the

Release

button. To select a different process use the

Next Procedure

or

Previous Procedure

buttons or dial another feature code.

114

«
...
310
311
312
313
314
...
»

Summary of Contents for IP Office Phone Manager





































































































































































































































































































































Reviews:

No comments