Avaya IP Office Phone Manager, Manual, Page: 306 / 324

Share

Page: 306 / 324

Avaya IP Office Phone Manager Manual Download Page 306

Phone Based Administration

Page 306

- Issue 6a (Thursday, February 22, 2018)

IP Office Basic Edition

Comments on this document? [email protected]

ETR 18D/ETR 34D Phone

1. At either or the first two extensions on the system, press

Feature 0 0

followed by two presses of the first

intercom or call appearance button.

2.

System Administration:

is shown on the display.

3. Dial

#732

.

4. Press

to start the copy. The phone displays

Copy In Progress

.

5. If the copy is not successful, the display will indicate the probable problem:

·

Shutdown and Insert Card

There is no SD card in either the

Optional SD

or the

System SD

card slot.

·

Copy Failed: Try Again

This message indicates that there was some problem. For example the card in the phone system's System SD
card slot was removed during the backup or the card has become corrupted.

·

Card is Write Protected

The SD card in the

Optional SD

card slot is write protected.

·

System Busy

Another backup, restore, upgrade or copy was already in progress at the time the manual process was
requested.

22

«
...
304
305
306
307
308
...
»

Summary of Contents for IP Office Phone Manager





































































































































































































































































































































Reviews:

No comments